Paradyne 7112 User Manual download pdf (Page 116)

MIB Descriptions

C-14

7112-A2-GB20-10March 1998

Table C-7. DS1 Near End Group Configuration Table Objects (2 of 4)

Object, OID, Access Setting/ContentsDescription

dsx1LineCoding

(dsx1ConfigEntry 6)

1.3.6.1.2.1.1.10.18.6.1.6

read-write

Corresponds to the network

line coding configuration

option for the network

interface on the DSU/CSU.

Supports the following

values:

 dsx1B8ZS(2) – Indicates

B8ZS line coding.

 dsx1AMI(5) – Indicates

AMI line coding.

dsx1SendCode

(dsx1ConfigEntry 7)

1.3.6.1.2.1.1.10.18.6.1.7

read-write

Indicates the test

patterns/codes being sent

over the network interface.

Supports the following

values:

 dsx1SendNoCode(1) –

specifies that the interface

is sending normal or

looped data. Setting the

interface to this value

stops an active “send

pattern” test on the

interface.

 dsx1SendLineCode(2) –

specifies that the network

interface is sending a

Remote Loopback UP

code for 10 seconds.

 dsx1SendResetCode(4) –

specifies that the network

interface is sending a

Remote Loopback DOWN

code for 10 seconds.

 dsx1SendQRS(5) –

specifies that the network

interface is sending a

QRSS test pattern. The

pattern is sent until the test

is halted (i.e., setting to

dsx1SendNoCode).

 dsx1SendOtherTestPatte

rn(8) – specifies that the

network interface is

sending a 1-in-8 test

pattern. The pattern is sent

until the test is halted (i.e.,

setting to

dsx1SendNoCode).

dsx1CircuitIdentifier

(dsx1ConfigEntry 8)

1.3.6.1.2.1.1.10.18.6.1.8

read-write

Contains the transmission

vendor’s circuit identifier,

for the purpose of

facilitating troubleshooting.

Applies to the T1 network

interface only.

A string of 0 to

255 characters.

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 155 156

Comments to this Manuals

No comments

Paradyne 7112 User Manual Page 116

Comments to this Manuals

Related products and manuals for Hardware Paradyne 7112