Paradyne 7112 User Manual download pdf (Page 25)

Configuring the DSU/CSU

3-3

7112-A2-GB20-20

March 1998

Accessing and Displaying Configuration Options

To display the configuration options, you must first copy one configuration option

set into the edit area.

 Procedure

To load a configuration option set into the configuration edit area:

1. Follow this menu selection sequence:

Main Menu

→

Configuration (Load Configuration From)

2. Select the Current, Customer 1, Customer 2, or Default Factory Configuration

and press Enter.

The selected configuration option set is loaded and the Configuration

Edit/Display menu screen appears.

See Appendix A for a list and explanation of the configuration options available.

Saving Configuration Options

When changes are made to the configuration options, the changes must be

saved to take effect. The S

ave key and Save Configuration To screen appear

when the user has an effective access level of 1. All other effective access levels

have read-only permission.

 Procedure

To save configuration options changes:

1. Press Ctrl-a to switch to the screen function key area below the dotted line.

2. Select S

ave and press Enter. The Save Configuration To screen appears.

3. Select one of the three configuration option areas on the screen and press

Enter. When Save is complete, Command Complete appears in the message

area at the bottom of the screen.

NOTE:

When Exit is selected before Save, a Save Configuration screen appears

requiring a Yes or No confirmation response.

If you select . . .

Then the . . .

Yes Save Configuration To screen appears.

No Main Menu appears and changes are not saved.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 155 156

No comments

Paradyne 7112 User Manual Page 25