Paradyne 7112 User Manual download pdf (Page 94)

Configuration Option Tables

A-18

7112-A2-GB20-10March 1998

Table A-9. SNMP NMS Security Options (2 of 2)

NMS

IP Address

Possible Settings: 000.000.000.000 – 255.255.255.255, Clear

Default Setting: 000.000.000.000

Enter an IP address for each of the managers set in the previous option.

is the

number of the manager (1 to 10). Use the next option to establish the security level for

each SNMP manager.

NOTE: When an SNMP message is received from an IP address that does not

match the IP address entries in this option, access is denied and an

“authenticationFailure” trap is generated.

000.000.000.000 – 255.255.255.255 – Sets the NMS IP address. The range for the first

byte is 001 to 255, with the exception of 127. The range for the remaining three bytes is

000 to 255.

Clear – Clears the IP address and sets to all zeros.

Access Level

Possible Settings: Read, Read/Write

Default Setting: Read

Set the access level for each IP address created in the previous option.

Read – Allows a read-only access (SNMP Get) to accessible MIB objects.

Read/Write – Allows both an SNMP Get and Set to MIB objects. Write access allowed

to all MIB objects specified as read-write in the MIB RFC. This access level is

overridden by the Community Name’s access level for the SNMP Manager, if the

Community Name access level is Read.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 155 156

No comments

Paradyne 7112 User Manual Page 94