ACCULINK 3162 DSU/CSUQUICK REFERENCEDocument No. 3162-A2-GL11-30
8Table 3. Synchronous Data Port Configuration Options (2 of 2)Option Comments/DescriptionFactory 2Factory 1Disable DisablePort (DTE) InitiatedDTLB
9Table 5. Cross Connect – Sync Data Port Assignment OptionsOption Factory 1 Factory 2 Comments/DescriptionNetwork NetworkAssigns this port to chann
10Table 6. General Configuration OptionsOption Factory 1 Factory 2 Comments/DescriptionGenerate YellowEnable EnableYellow alarm is generated by the
11Table 7. User Interface – Communication Port Configuration Options (2 of 2)Option Comments/DescriptionFactory 2Factory 11.2 1.22.4 2.44.8 4.8Data R
12Table 8. User Interface – External Device Configuration OptionsOption Factory 1 Factory 2 Comments/DescriptionEt lD iDisable DisableControls whet
13Table 9. User Interface – Telnet Sessions Configuration OptionsOption Factory 1 Factory 2 Comments/DescriptionTelnet Session:Enable EnableSpecifi
14Table 11. Alarm Configuration OptionsOption Factory 1 Factory 2 Comments/DescriptionASCII AlarmDisable Disable Does not display alarm messages.AS
15Table 12. Management and Communication – Communication ProtocolConfiguration OptionsOption Factory 1 Factory 2 Comments/DescriptionNode IP Adr:[T
16Table 13. Management and Communication – General SNMP ManagementConfiguration OptionsOption Factory 1 Factory 2 Comments/DescriptionSNMP Managemen
17Table 15. Management and Communication – SNMP Traps Configuration OptionsOption Factory 1 Factory 2 Comments/DescriptionSNMP Traps:Enable EnableS
Copyright 1998 Paradyne Corporation.All rights reserved.Printed in U.S.A.NoticeThis publication is protected by federal copyright law. No part of th
18Important Safety Instructions1. Read and follow all warning notices and instructions marked on the product orincluded in the manual.2. This product
1911. In addition, if the equipment is to be used with telecommunications circuits, take thefollowing precautions:— Never install telephone wiring du
20Notice to Users of the United States Telephone Network1. This equipment complies with Part 68 of the FCC rules. On the equipment is a labelthat con
216. FCC compliant telephone line cords with modular plugs are provided with thisequipment. This equipment is designed to be connected to the telepho
TM 1ACCULINK 3162 DSU/CSUQuick ReferenceDocument Number 3162-A2-GL11-30November 1998Product Documentation on the World Wide WebWe provide complete pro
2Quick Start ProcedureThe following procedure is for experienced DSU/CSU users who are familiar with the3162 DSU/CSU installation process and have no
34. Depending on your application, connect the COM port to:— An SNMP or Telnet device— A network device such as a router— An external LAN adapter— Th
4Configuration OptionsConfiguration options are accessed from the Configuration branch of the front panelmenu.MainStatus97-15576TestConfigurationEdit
5Factory default configuration options are shown in boldface type in the following tables.Table 1. Network Interface Configuration OptionsOption Fa
6Table 2. DTE Interface Configuration OptionsOption Factory 1 Factory 2 Comments/DescriptionInterface Status:Enable EnableEnables the use of the DT
7Table 3. Synchronous Data Port Configuration Options (1 of 2)Option Factory 1 Factory 2 Comments/DescriptionE530 E530Port Type:V.35 V.35Selects th
Comments to this Manuals