Paradyne 7112 User Manual download pdf (Page 15)

2-1

7112-A2-GB20-20

March 1998

Using the ASCII Terminal

Interface (ATI)

Accessing the ATI

You can communicate with the ATI using one of the following methods:

 Direct connection through the Terminal port.

 Dialing in through an external modem to the Terminal port.

 Telnet session through the Ethernet port.

 Telnet session through the Facility Data Link (FDL).

NOTE:

Only one ATI session can be active at a time, and another user’s session

cannot be forced to end. To automatically log out a user due to inactivity,

enable the Inactivity Timeout option (see Table A-6, Terminal Port Options

and Table A-7, Telnet Session Options).

The user interface is blank until activated. Press Enter to activate the user

interface. Security can limit ATI access several ways. To setup security or a login

ID, refer to Chapter 4,

Security

Connecting to the Terminal Port

Ensure that the device you connect communicates using the following settings:

 Data rate set to 9.6 kbps.

 Character length set to 8.

 Parity set to None.

 Stop Bits set to 1.

To change Terminal port settings, refer to Table A-6, Terminal Port Options.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 155 156

No comments

Paradyne 7112 User Manual Page 15