Paradyne 7112 User Manual download pdf (Page 16)

Using the ASCII Terminal Interface (ATI)

2-2

7112-A2-GB20-20

March 1998

Initiating an ATI Session

The Main Menu screen is displayed on the screen unless a login ID and

password is required or the ATI is already in use.

If security is enabled

, the system prompts you for a login ID and password. After

you enter a valid login ID and password, the Main menu appears. If you enter an

invalid login ID and password after three attempts, the Telnet session closes or

the terminal connection returns to an idle state. Refer to Chapter 4,

Security

If the ATI is already in use

, you will see a “connection refused” or “connection

failed” message (if you are using a Telnet session) or you will see the IP address

of the other user (if you are using the Terminal port).

Entry to all of the DSU/CSU’s tasks begins at the Main Menu screen.

main PARADYNE

Device Name: Model: 7112

MAIN MENU

Status

Test

Configuration

Control

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Ctrl-a to access these functions, ESC for previous menu M

ainMenu Exit

ave

Menu Path

Screen

Function

Keys

Input Fields

Screen

Area

Select . . . To . . .

Status View system status, diagnostic test results, cross connections, statistics,

and LEDs identity information.

Test Select and cancel tests for the DSU/CSU’s interfaces.

Configuration Display and edit the configuration options.

Control Control the user interface for device naming, login administration, or to

initiate a power-up reset of the DSU/CSU.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 155 156

Comments to this Manuals

No comments

Paradyne 7112 User Manual Page 16

Comments to this Manuals

Related products and manuals for Hardware Paradyne 7112