Paradyne 7112 User Manual Page 28

  • Download
  • Add to my manuals
  • Print
  • Page
    / 156
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 27
Configuring the DSU/CSU
3-6
7112-A2-GB20-20
March 1998
Using the Individual Channel Assignment Method
This channel method allows you to select the individual DS0 channels to allocate
to the data port. The data port rate is automatically determined based on the
number of channels selected. The DS0s do not need to be contiguous.
Procedure
To assign the data port by the individual channel method:
1. Access the Cross Connect Assignments screen by following this menu
selection sequence:
Main Menu
Configuration
Load Configuration From
Cross Connect
2. Use the Assign By field to specify the assignment method (Channel).
3. Specify the port assignments for the individual DS0 channels. The DS0
channels do not need to be contiguous.
4. The port rate increases as the port is assigned to each additional DS0
channel. For example, if two DS0 channels (at 64 kbps each) are assigned to
the data port, a port rate of 128 kbps is required.
5. Select Ctrl-a and then S
ave to save your changes.
Clearing DS0 Channel Assignments
You can clear (deallocate) all the DS0 channels currently allocated to network
interface.
Procedure
To clear DS0 channel allocation:
1. Access the Cross Connect Assignments screen by following this menu
selection sequence:
Main Menu
Configuration
Load Configuration From
Cross Connect
2. Select Ctrl-a and then Clrassign.
3. Press Enter to clear the specified DS0 channels.
Page view 27
1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 155 156

Comments to this Manuals

No comments