Paradyne 7112 User Manual Page 137

  • Download
  • Add to my manuals
  • Print
  • Page
    / 156
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 136
Standards Compliance for SNMP Traps
D-5
7112-A2-GB20-20
March 1998
The tests that affect the enterpriseTestStart, enterpriseTestStop, and the
variable-binding are different for each particular interface. Diagnostic tests are
only supported on the physical T1 network and user data port interfaces. The
specific tests and variable-bindings are described in the following table:
Interface
enterpriseTestStart/Stop
Variable-Bindings
Possible Cause
Physical Sublayer
T1 network
ifIndex (RFC 1573)
ifAdminStatus
(RFC 1573)
ifOperStatus (RFC 1573)
ifType (RFC 1573)
dsx1SendCode
(RFC1406)
enterpriseTest Start – Any one
of the following tests is active
on the interface:
Remote Line Loopback
Send QRSS pattern
enterpriseTest Stop – No
longer has any tests running
on the interface.
ifIndex (RFC 1573)
ifAdminStatus
(RFC 1573)
ifOperStatus (RFC 1573)
ifType (RFC 1573)
dsx1LoopbackConfig
(RFC 1406)
enterpriseTest Start – Any one
of the following tests is active
on the interface:
Line Loopback
Payload Loopback
enterpriseTest Stop – No
longer has any tests running
on the interface.
ifIndex (RFC 1573)
ifAdminStatus
(RFC 1573)
ifOperStatus (RFC 1573)
ifType (RFC 1573)
ifTestType (RFC 1573)
enterpriseTest Start – Any one
of the following tests is active
on the interface:
Repeater Line Loopback
Send 1-in-8 pattern
All Monitor Pattern tests
enterpriseTest Stop – No
longer has any tests running
on the interface.
Synchronous User
Data Ports
ifIndex (RFC 1573)
ifAdminStatus
(RFC 1573)
ifOperStatus (RFC 1573)
ifType (RFC 1573)
ifTestType (RFC 1573)
enterpriseTest Start – Any one
of the following tests is active
on the port:
Local Loopback (DTE)
Send 511 pattern
Monitor 511 pattern
enterpriseTest Stop – No
longer has any tests running
on the port.
Page view 136
1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 155 156

Comments to this Manuals

No comments