Paradyne 9126-II User Manual download pdf (Page 338)

11. Setting Up Network Health for FrameSaver Devices

11-4

September 2002 9128-A2-GB20-80

Configuring the Discovered Elements

Network Health sets the speed for discovered elements when it polls the unit for

the first time. For a FrameSaver SLV unit, the speed set would be the unit’s CIR.

No additional configuration should be required. However, you should verify that all

appropriate information has been retrieved.

NOTE:

If an SLV unit does not have CIR configured, or if it is not configured correctly,

Network Health sets the unit’s CIR to 0 Kbps. For this reason, you should

reconfigure the unit’s CIR before Network Health polls it. If 0 Kbps is the speed

setting, you will need to edit the unit’s CIR from Network Health.

Additional information can be edited, as well. See

Discovering Elements

in the

Network Health User Guide

for additional information.

Procedure

To change the CIR for FrameSaver SLV unit elements from Network Health:

1. Select the Edit Before Saving button at the bottom of the Discovering dialog

box once the discovery process is completed.

The Poller Configuration window opens.

2. Double-click on the first element discovered. The Modify Element dialog box

opens.

3. In the Speed box, select the Override radio button and enter the CIR for the

unit in the text box.

Letters

and

can be used as shortcuts (e.g., enter 56 k for 56 kilobits per

second, or 16 m for 16 Mbits per second).

4. Apply your changes:

— Select the Apply/Next button to save your change and bring up the next

element to be edited. Continue until all newly discovered frame relay

elements have been modified before selecting the OK button.

— Select the the OK button.

The Modify Element dialog box closes.

5. Select the OK button at the bottom of the Poller Configuration window. The

modified elements are saved to the database, and the units are polled.

Allow Network Health to continue polling for about a half an hour to allow time for

data to be gathered before running any reports.

1 2 ... 333 334 335 336 337 338 339 340 341 342 343 ... 469 470

No comments

Paradyne 9126-II User Manual Page 338