Paradyne 9126-II User Manual download pdf (Page 139)

100

101

4. Configuration Options

9128-A2-GB20-80 September 2002

4-95

Default Gateway Address

Possible Settings: 001.000.000.000 – 223.255.255.255, Clear

Default Setting: Clear (000.000.000.000)

Specifies the IP address for the port’s default gateway. It is used for packets that do not

have a route.

001.000.000.000 – 223.255.255.255 – Shows the IP address for the port, which can be

viewed or edited (i.e., a router on the LAN).

Clear – Fills the default gateway’s IP address with zeros.

Proxy ARP

Possible Settings: Enable, Disable

Default Setting: Disable

Determines whether the FrameSaver unit will use the Proxy ARP (Address Resolution

Protocol) technique, acting as the gateway to other FrameSaver devices in its

management network when there is an ARP request for a device not on the Ethernet.

Enable – Proxy ARP is enabled on the port so the FrameSaver unit will act as an agent for

or gateway to other units in its management network. Using this technique, the

FrameSaver unit returns its own MAC (Media Access Control) address in response to

ARP requests when it recognizes that the destination IP address is in its subnet, but the

device sending the ARP request is in another network. Packets sent to the FrameSaver

unit’s gateway address are forwarded to the appropriate device.

Disable – The Proxy ARP technique will not be used by the unit; it will not act as an agent

for other devices in its network.

Table 4-23. Ethernet Management Options (2 of 2)

1 2 ... 134 135 136 137 138 139 140 141 142 143 144 ... 469 470

Comments to this Manuals

No comments

Paradyne 9126-II User Manual Page 139

Comments to this Manuals

Related products and manuals for Bridges & repeaters Paradyne 9126-II