Paradyne 9126-II User Manual download pdf (Page 23)

1. About the FrameSaver SLV

9128-A2-GB20-80 September 2002

1-7

Integral Modem.

Provides an internal 14.4 Kbps modem to support dialing in

to the unit for out-of-band management and automatic dialing out of SNMP

traps.

Modem PassThru.

Provides access to another device’s VT100-compatible

user interface over a dial connection. When this feature is enabled, a logical

connection between the unit’s modem and COM ports is created, allowing

access to a collocated device’s serial port via the FrameSaver unit’s internal

modem. This feature is sometimes referred to as the Router Assist feature.

Configurable FTP Transfer Rate.

Allows you to control the transmit rate

when downloading firmware into the FrameSaver unit and uploading user

history statistics to an NMS (Network Management System) via the COM port

connection or a management PVC so the data can be transferred as a

background task using the standard File Transfer Protocol (FTP) over

extended periods of time using low bandwidth.

RMON User History Performance Statistics via SNMP Polling.

Provides

access to the physical interface and basic frame relay performance statistics

by polling the FrameSaver unit using SNMP (Simple Network Management

Protocol). These statistics are available real-time via the Enterprise MIB and

historically as an RMON2 User History object.

Frame Relay Traffic Policing.

Ensures proper alignment and correlation of

CIR (Committed Information Rate) values between the FrameSaver unit and

the network switch. When this feature is enabled, the unit can enforce CIR and

EIR (Excess Information Rate), marking frames that exceed CIR as DE

(Discard Eligible) using the same method used by the switch.

Service Provider Support.

Provides information and tools useful to network

service providers, which includes the following:

— IP Routing Table – Shows the IP routing table for the FrameSaver unit,

with network as well as host routes, the number of hops to the destination,

the method by which the route was added to the table, the interface used

to get to the destination, and how long the route has been in existence.

— Trap Event Log – Displays the SNMP (Simple Network Management

Protocol) trap event log for the FrameSaver unit from the menu-driven user

interface, with the most recent events first, keeping a running total for all

trap events stored, the amount of time since the event was logged, plus a

description of the trap.

— Troubleshooting PVC – Provides a dedicated troubleshooting

management link that helps service providers isolate problems within their

network.

ATM VPI/VCI and DLCI Correlation.

For networks with both ATM and frame

relay-access endpoints, allows the FrameSaver unit to report the originating

Virtual Path and Channel Identifier (VPI/VCI) in the far-end ATM-access

endpoint where the local DLCI is mapped so they can be correlated for

OpenLane SLV reports.

Dual Flash Memory.

Allows software upgrades while the unit is up and

running. Two software loads can be stored and implemented at the user’s

discretion.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 469 470

Comments to this Manuals

No comments

Paradyne 9126-II User Manual Page 23

Comments to this Manuals

Related products and manuals for Bridges & repeaters Paradyne 9126-II