Paradyne 9126-II User Manual download pdf (Page 60)

100

101

4. Configuration Options

4-16

September 2002 9128-A2-GB20-80

Modifying ISDN Link Profiles

Once an ISDN Link Profile is configured using the Automatic Backup Configuration

feature, phone numbers and Calling IDs need to be entered. FrameSaver units

with ISDN backup capability can originate or answer calls, as needed, so both

phone numbers and Calling IDs are needed.

Procedure

1. Select Link Profiles, then Modify.

Main Menu

→

Configuration

→

ISDN

→

Link Profiles

2. Add a name and phone number to the ISDN Link Profile(s) created by

Automatic Backup Configuration.

— Name for the destination entered (e.g., Tampa). The default setting is

HQ_Site for the first ISDN Link Profile.

— Phone numbers entered:

NOTES:

Remember to include local dial-out numbers (i.e., 9, then the number).

For every originating (outbound) phone number entered, an answering

(inbound) phone number must be entered at the far end, and vice versa.

— Maximum Link Rate (Kbps) set to the appropriate speed, if necessary.

— Caller Identification Method set to Proprietary if call validation is not

required. The setting must be the same at both ends of the circuit.

— An Alternate Outbound Phone Number should a call using the primary

Outbound Phone Number be unsuccessful, if desired.

3. S

ave the configuration.

See Table 4-11, ISDN Link Profile Options, for configuration information.

For Originating a Backup Call For Answering a Backup Call

Outbound and Alternate Outbound

phone numbers

Valid characters can include:

Numbers (0–9)

Special characters * and #

Spaces

Parentheses ( )

Inbound Calling ID1 and ID2

These are the phone numbers of units

from which calls will be accepted.

Valid characters can include:

Numbers (0–9)

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 469 470

Comments to this Manuals

No comments

Paradyne 9126-II User Manual Page 60

Comments to this Manuals

Related products and manuals for Bridges & repeaters Paradyne 9126-II