Paradyne 9820 User Manual download pdf (Page 73)

Configuration Options

4-37

9820-A2-GB20-20

June 2000

Table 4-11. Management PVC Options (2 of 4)

Intf

Subnet Mask

Possible Settings: Node-Subnet-Mask, Calculate, Special (

nnn

)

Default Setting: Node-Subnet-Mask

Specifies the subnet mask needed to access the unit when the management PVC is

providing connectivity to an external IP network (through frame relay) that requires a

specific subnet mask for the interface.

Node-Subnet-Mask – Uses the

Interface

IP Subnet contained in the Node-Subnet

Mask configuration option (see Table 4-10, Node IP Options).

Calculate – Calculates the subnet mask created by the IP protocol based on the class

of the IP address (Class A: 255.000.000.000, Class B: 255.255.000.000, or

Class C: 255.255.255.000). Cannot be displayed or edited.

Special (000.000.000.000 – 255.255.255.255) – Allows you to edit/display the subnet

mask for the management PVC when the subnet mask is different for this interface. A

text field displays where you can enter the subnet mask for this unit’s management

PVC.

Set DE

Possible Settings: Enable, Disable

Default Setting: Disable

Specifies whether frames (packets) sent on a management PVC have the Discard

Eligible (DE) bit set. This bit is used by the network to prioritize which frames to discard

first during periods of network congestion. This allows management traffic to be viewed

as lower priority than customer data.

Enable – Sets the DE bit to one on all frames sent on the management PVC.

Disable – Sets the DE bit to zero on all frames sent on the management PVC. This is

the recommended setting, particularly for NSPs providing a managed network service.

Primary Link

Possible Settings: Net1-FR1, Port-1, Clear

Default Setting: Initially blank; no default.

Specifies the frame relay interface to use for this management PVC. The interface

selected must have at least one DLCI (or DLCI with EDLCI) defined, which is not part of

a PVC connection or already assigned as a management PVC.

Net1-FR1 – Specifies that the network interface be used in the connection.

Port-1 – Specifies that the frame relay link on the user data port be used in the

connection.

Clear – (Models 9820, 9820-2M, 9820-8M.) Clears the link and the DLCI field, and

suppresses the EDLCI field if the DLCI was multiplexed.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 280 281

Comments to this Manuals

No comments

Paradyne 9820 User Manual Page 73

Comments to this Manuals

Related products and manuals for Unknown Paradyne 9820