Paradyne 9820 User Manual Page 59
- Page / 281
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Configuration Options
4-23
9820-A2-GB20-20
June 2000
Configuring Frame Relay for an Interface
Select Frame Relay from the interface’s menu to display or change the Frame
Relay options for an individual interface (see Table 4-7).
Main Menu
→
Configuration
→
[Network/Data Ports]
→
Frame Relay
See
Configuring Frame Relay and LMI for the System
for additional information.
Table 4-7. Interface Frame Relay Options (1 of 3)
LMI Protocol
Possible Settings: Initialize_From_Net1FR1, Initialize_From_Interface,
Auto_On_LMI_Fail, Standard, Annex-A, Annex-D
Default Setting:
For user data port links:
Initialize_From_Interface
For network data port links:
Auto_On_LMI_Fail
Specifies either the LMI protocol supported on the frame relay interface or the discovery
source for the LMI protocol.
Initialize_From_Net1FR1 – The LMI type supported on this frame relay link will be
configured to match the LMI protocol initially discovered on the primary Network frame
relay link (Net1FR1). LMI Protocol is set to None internally, but once a protocol has
become active or is set on the primary Network link, the protocol will be set to the same
value on this link (Standard, Annex-A or Annex-D). The protocol will
not
be updated
based on changes to Net1FR1 after being set initially.
Display Conditions
– This option value only appears for a user data port.
Initialize_From_Interface – The LMI type supported on this frame relay link will be
configured to match the LMI protocol discovered from the attached Network line or DTE
device. Once a protocol has become active, the protocol will be set to the protocol
discovered (Standard, Annex-A or Annex-D) on the frame relay link. The protocol will
not
be updated after being initially discovered. Frame relay links on the user data port
discover the LMI protocol from an attached device via LMI status polls.
Auto_On_LMI_Fail – The LMI type supported on this frame relay link will be configured
to match the LMI protocol discovered from the attached Network line or the DTE device
whenever an LMI Link Down failure occurs. This option is available for frame relay links
on the user data port and network data ports. Frame relay links on the user data port
discover the LMI protocol from LMI status polls on attached DTE devices. Frame relay
links on the network data port discover LMI protocol by sending polls to an attached
Network line and “listening” for correct poll response messages.
Standard – Supports Standard LMI and the Stratacom enhancements to the
Standard LMI.
Annex-A – Supports LMI as specified by Q.933, Annex A.
Annex-D – Supports LMI as specified by ANSI T1.617, Annex D
.
- FrameSaver SLV 1
- 4 Configuration Options 4
- 5 Security and Logins 5
- 6 Monitoring 5
- 7 FTP Operation 6
- 8 Troubleshooting 6
- A Menu Hierarchy 8
- D Technical Specifications 9
- E Equipment List 9
- Contents 10
- About This Guide 11
- Section Description 12
- Product-Related Documents 13
- Conventions Used 14
- About FrameSaver SLV 15
- In-Line Monitors 15
- 9820-A2-GB20-20 16
- June 2000 16
- User Interface and 21
- Basic Operation 21
- Logging On 22
- Screen Work Areas 25
- Navigating the Screens 26
- Function Keys 27
- Selecting from a Menu 28
- Selecting a Field 29
- Entering Information 29
- Configuration Procedures 31
- Basic Configuration 32
- Configuration Option Areas 33
- Configuring the Ethernet Port 40
- Setting Up for Trap Dial-Out 41
- Setting Up Auto-Configuration 42
- (default) 43
- Configuration 44
- DLCI Records 44
- Setting Up Management 46
- Changing Operating Mode 48
- Configuration Option Tables 49
- Display Conditions 50
- For user data port links: 59
- For network data port links: 59
- Management and Communication 68
- Configuring Management PVCs 72
- ASCII text entry 76
- Telnet and FTP Session 77
- For FrameSaver SLV 9820: 79
- For FrameSaver SLV 9820-2M: 79
- For FrameSaver SLV 9820-8M: 79
- Communication Port 88
- Configuring Node IP 92
- Information 92
- .nnn.nnn.nnn 94
- Security and Logins 99
- Limiting Access 100
- Creating a Login 101
- (Model 9820-45M) 102
- Procedure 105
- Controlling SNMP Access 106
- " Procedure 107
- Modifying a Login 110
- Deleting a Login 110
- Monitoring 111
- nn.nn.nn 112
- Front Panel LEDs 113
- Health and Status 114
- Messages 114
- Main Menu 116
- Configuration Options 117
- Table 6-6. General LEDs 118
- Indication What It Means 118
- Device Messages 121
- (Seen at an FTP 122
- Changing Software 122
- FTP Operation 122
- Status Information 126
- (xxxxxxxx 127
- Message What It Indicates 129
- Troubleshooting 130
- LMI Reported DLCIs 131
- Status What It Indicates 132
- PVC Connection Status 133
- Field What It IndicatesStatus 134
- Network Interface Status 135
- IP Routing Table 136
- Field What It Indicates 137
- Performance Statistics 138
- Service Level Verification 140
- Statistic What It Indicates 141
- DLCI Performance Statistics 142
- Frame Relay 144
- (cont’d) 145
- Ethernet 147
- Trap Event Log 148
- FTP File Transfer 150
- Upgrading System Software 152
- LMI Packet Capture Utility 154
- Problem Indicators 156
- Display LMI Trace Log 160
- System and Test Status 161
- Troubleshooting Tables 165
- Frame Relay PVC Problems 167
- Tests Available 168
- Starting and Stopping a Test 169
- Aborting All Tests 170
- PVC Tests 171
- 98-16186 172
- 98-16187 172
- Monitor Pattern 173
- Connectivity 173
- Physical Tests 174
- IP Ping Test 175
- Lamp Test 176
- Setting Up OpenLane for 177
- FrameSaver Devices 177
- Getting Started 180
- NetScout Probe User Guide 181
- NetScout Manager/Plus & 185
- Editing Alarms 187
- Adding SLV 188
- Alarms Manually 188
- Administrator Guide 188
- Adding SLV Alarms Manually 189
- Configuring Alarms in 190
- Creating History Files 191
- CAUTION: 191
- (Models 9820 and 9820-2M) 197
- Setting Up Network Health for 199
- Grouping Elements for Reports 203
- About Service Level Reports 204
- About At-a-Glance Reports 204
- About Trend Reports 205
- Printed Reports 205
- Network Health Reports Guide 207
- Hardware Maintenance 209
- (9820-45M) 209
- WARNING: 210
- Replacing a Power Module 212
- Menu Hierarchy 213
- 00-16786b 215
- RMON Alarm Defaults 217
- SNMP MIBs and Traps, and 217
- MIB Support 218
- System Group (mib-2) 219
- Interfaces Group (mib-2) 220
- H For the DTE: 221
- H For the DCE: DTE 221
- H For the DCE: 221
- Example: 222
- Trap: warmStart 223
- Trap: authenticationFailure 223
- Traps: linkUp and linkDown 224
- Interface 225
- Strings: 226
- V.35 and EIA-530-A X.21 HSSI 227
- Signal Name 227
- DCE DTE DCE DTE DCE DTE 227
- Traps: enterprise-Specific 228
- Traps: RMON-Specific 230
- RMON Alarm and Event Defaults 231
- DLCI Alarm Defaults 237
- Object ID (OID) 240
- Item MIB/Tag 240
- MIB/TagItem 241
- Object ID (OID) MIB/TagItem 245
- 9820-A2-GB20-20June 2000 246
- Connectors, Cables, and 247
- Pin Assignments 247
- Rear Panels 248
- COM (Terminal) Port Connector 249
- 99-16303 253
- 98-15883 254
- (Feature No. 9008-F1-522) 255
- 99-16294 257
- 99-16304 259
- Technical Specifications 263
- Specification Criteria 264
- Equipment List 267
- Description 268
- Model/Feature 268
- Part Number Feature Number 269
Related products and manuals for Unknown Paradyne 9820
(2 pages)
Unknown Paradyne UIM-10/100 User Manual
(5 pages)
(5 pages)
Unknown Paradyne 39xx Series User Manual
(1 pages)
(1 pages)
Unknown Paradyne HOTWIRE 8546 User Manual
(12 pages)
(12 pages)
Unknown Paradyne 3830 User Manual
(138 pages)
(138 pages)
© 2020, manymanuals.com. All rights reserved. | 0.287 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals