Paradyne 7510-A2-GB20-00 727 User Manual download pdf (Page 51)

Configuration Option Tables

A-4

7510-A2-GB20-00March 1997

Network Interface Options Menu

For Network Interface Options, refer to Table A-2. To access the Network

Interface Options screen, follow this menu selection sequence:

Main Menu

→

Configuration (Load Configuration From)

→

Configuration Edit/Display

→

Network

Table A-2. Network Interface Options

Network-initiated DSU Loopback (64K CC)

Possible Settings: Enable, Disable

Default Setting: Enable

Indicates whether the access unit responds to a DSU latching loopback sequence sent

by the network as specified by TR62310.

 Network-initiated DSU Loopback (64K CC) option appears when Operating Mode

is set to DDS in Table A-1.

Enable – Responds to network-initiated commands to start and stop a latching DSU

loopback.

Disable – DSU will not respond to a DSU loopback initiated by the network.

Data Scrambling (64K CC)

Possible Settings: Enable, Disable

Default Setting: Disable

Data scrambling is used to suppress the possible simulation of network-initiated DSU

latching loopback commands by application data.

 Data Scrambling (64K CC) option appears when Operating Mode is set to DDS in

Table A-1.

Enable – Enables data scrambling. The local and remote units must be set the same.

Disable – No data scrambling.

V.54 Initiated DSU Loopback

Possible Settings: Enable, Disable

Default Setting: Disable

When enabled, user data is looped back to the network when a V.54 Loop Up sequence

is received. The DSU loopback ends when a V.54 Loop Down sequence is detected.

Enable – DSU loopback can be initiated or terminated by a remote unit sending in-band

V.54 Loop 2 Up or Down sequences.

Disable – V.54 Loop 2 sequences are ignored.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 69 70

No comments

Paradyne 7510-A2-GB20-00 727 User Manual Page 51