Paradyne 12-Port E1 Access Multiplexer EAM2000-12 User Manual download pdf

210-0000036 rev03

EAM2000-12

12-Port E1 Access Multiplexer

INSTALLATION

1. Unpack and inspect the EAM2000-12.

If there is visible damage, do not attempt to connect the device; contact Customer Support at 1-

877-638-2638 (001-603-427-0600 for international customers) or [email protected].

2. Install the EAM2000-12 in an IP DSLAM chassis.

All Access Multiplexer Modules for Net to Net Technologies' IP DSLAMs are hot swappable;

installing or removing an Access Module while the chassis is powered up does not affect the

operational status of other Access Modules within the chassis. The IPD12000 is a fourteen slot

chassis; slots 1-12 are reserved for Access Modules (such as the EAM2000-12) and slots 13-14

are reserved for Multiplexer Uplink Modules (such as the MUM200-2). Access Modules may be

placed in any order in slots 1-12. The IPD4000 is a five slot chassis; slots 1-4 are reserved for

Access Modules and slot 5 is reserved for a Multiplexer Uplink Module.

a. Align the EAM2000-12 with the slot module guides of the chosen slot for installation (slot

1-12 on the IPD12000 or slot 1-4 on the IPD4000).

b. Slide the EAM2000-12 firmly into the chassis. DO NOT USE EXCESS FORCE.

c. Secure the EAM2000-12 by tightening the fastening screws on the module faceplate.

d. Verify that the PWR (Power) LED on the EAM2000-12 faceplate is illuminated.

Interface Module User Guide

CAUTION

Net to Net Technologies strongly recommends the use of proper electrostatic discharge (ESD) precautions

when handling this equipment.

NOTE

There must be a Multiplexer Uplink Module installed in the IP DSLAM chassis in order for Access Modules to

operate.

1 2 3 4 5 6 7

Summary of Contents

Page 1 - EAM2000-12

210-0000036 rev03EAM2000-1212-Port E1 Access MultiplexerINSTALLATION1. Unpack and inspect the EAM2000-12.If there is visible damage, do not attempt to

Page 2 - OVERVIEW

210-0000036 rev033. Connect the E1 Line(s).Plug the E1 cable into the RJ21 connector for the chosen slot on the back of the IP DSLAM. The EAM2000-12 w

Page 3 - Default Settings

210-0000036 rev03!192.168.254.252 if the MUM is in slot 13 (IPD12000) or slot 5 (IPD4000) !192.168.254.253 if the MUM is in slot 14 (IPD12000) e. Log

Page 4 - Data Storage

210-0000036 rev03Management System Configuration DefaultsEAM2000-12 Circuit DefaultsData StorageConfiguration backup is inherent in the EAM2000-12. Up

Page 5 - Line Code

210-0000036 rev03Frame TypeFrame type is the E1 data encapsulation method. A frame consists of 248 bits (8-bit samples of each of the 31 E1 channels p

Page 6 - ADDITIONAL INFORMATION

210-0000036 rev03ADDITIONAL INFORMATIONLED Indicators (A pulsing LED blinks steadily at a rate of once per second. A flashing LED blinks at a more rap

Page 7 - 210-0000036 rev03

210-0000036 rev03Regulatory ComplianceEuropean Regulatory Compliance Information for Class A Equipment This Class A product complies with European Nor

Comments to this Manuals

No comments

Paradyne 12-Port E1 Access Multiplexer EAM2000-12 User Manual

Browse online or download User Manual for Hardware Paradyne 12-Port E1 Access Multiplexer EAM2000-12. Paradyne 12-Port E1 Access Multiplexer EAM2000-12 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Hardware Paradyne 12-Port E1 Access Multiplexer EAM2000-12