Paradyne 12-Port User Manual download pdf (Page 6)

4.2.2 Launch Your Web Browser

Launch a web browser on your PC such as Microsoft Internet Explorer or Netscape Navigator.

4.2.3 Enter Your DSLAM's IP Address

Enter the DSLAM's IP Address into the address field at the top of your browser window and

press the Enter key.

4.2.4 Log In

are unknown, contact your System Administrator or Information Technology Manager for

assistance.

Once you have logged in as a superuser, you will be able to make configuration changes to the

SAM2000GV, and any other interface modules installed in your IP DSLAM, as desired. For more

detailed information regarding SAM2000GV configuration via NMS, refer to Net to Net's NMS

Management User Guide: http://www.nettonet.com/support/docs/210-0000048.

4.3 Via Simple Network Management Protocol (SNMP)

4.3.1 Establish a Connection With Your IP DSLAM

Establish a connection between your IP DSLAM and your PC, either directly (through the

10/100 Ethernet MGMT port on the MUM faceplate) or, if your DSLAM has been configured to

allow inband management, across your local network. For direct connections, verify that the

MGMT LNK LED on the MUM faceplate is illuminated.

4.3.2 Launch Your MIB Browser

Launch a MIB browser program on your PC. If you have not yet downloaded the necessary

MIBs to your PC or local network, you can obtain the Net to Net enterprise MIBs from

ftp://ftp.nettonet.com/download/mibs

and the supported portions of MIB-II from the Internet

Engineering Task Force RFC 1213 at http://www.ietf.org/rfc.html

. After downloading the MIBs,

you will need to compile them into your MIB browser; refer to your MIB browser user manual

for further instruction.

Once the MIBs have been compiled, you will be able to make configuration changes to the

SAM2000GV, and any other interface modules installed in your IP DSLAM, as desired. For more

detailed information regarding SAM2000GV configuration via SNMP, refer to Net to Net's SNMP

Management User Guide: http://www.nettonet.com/support/docs/210-0000053.

NOTE

The MUM200-2 does not have SNMP capabilities; you must have a MUM2000-2 installed in your IP DSLAM in

order to access DSLAM management or any interface modules via SNMP.

210-0000045 rev04

1 2 3 4 5 6 7 8 9 10

No comments

Paradyne 12-Port User Manual Page 6