Paradyne Switch 6800 User Manual download pdf (Page 134)

2Modem/DSU Commands

2-1116800-A2-GB31-20 January 1997

Figure 2-29. Digital Test Input Form

This input form contains the following fields:

Control Device(s) (Required field)

Enter the control device(s) to be tested. For 3600 Series DSUs, only one device can be

specified. For other device models, one or more devices may be specified.

Tributary Device(s)

Enter the tributary device(s) to be tested. It is not necessary to specify a tributary DDD

modem. If a tributary is not specified, the control DDD establishes a call to the tributary

whose phone number is contained in the control’s call directory #1.

Number of 100K bit blocks or duration of test (sec)

If you are testing an APL tributary modem, enter the number of bit blocks to be sent

during the test. The valid range of entries is from 1 through 3200K blocks.

If you are testing a 3600 Series DSU or a DBM associated with a DSU, enter the number

of seconds this test is to run. The valid range of entries is from 1 through 3200 seconds.

Duration of test (dsu)

This field is applicable only for DATAPHONE II DSUs. If you are testing a tributary

DSU, enter the duration of the test. The valid range of entries is from 1 through

255 seconds.

1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 236 237

No comments

Paradyne Switch 6800 User Manual Page 134